Some Importnat Things need Remember:
Important Rules to Follow:
✅ Use O+ Support Tool For All OnePlus/Oppo Devices
❌ Don’t Try Os15/14 in old tool its will be Instant Otp Loss.
⚠️ Using the wrong file will result in an instant OTP loss.
🔑 Every authentication is important—use it safely.
📌 First Match Phone PCB with Item in O+ Flash Tool then start.
⚠️ Must check nv default option otherwise get instant OTP loss.
🔄 Always use the correct and tested latest flash file.
⚠️ If model disconnected after auth then get instant otp loss
❌Downgrade not possible at this time so don’t try.
| # | Tool Name | Tool Version | Download |
|---|---|---|---|
| 1 | RFT Xiaomi all in one pack | Latest | Download Now |
| 2 | O+SupportTool_V2.7.2.3_RFTv3.0 pass = @fza | O+ 2.7xx | Download Now |
| 3 | MsmDownloadTool_2.0.7.2_RFTv3.0 pass = @fza | MSM_2.7.2 | Download Now |
| 4 | For_OLd_Realme_Mtk_OplusTool_v5.8.58.0_RFTv3.0 Pass = @fza | Dev v2.5 | Download Now |
| 5 | OplusFlashTool_v5.6.44.0_for_Sales pass = @fza | DL_TOOL | Download Now |
| 6 | Oplus_Tool_V5.8.6.44_RFTv3.0 Pass = @fza | Dev v5.8.6.44 | Download Now |
| 7 | For all tools Extract and run => RFTv3.0 | RFTv3.0 | Download Now |
Some issues and their solutions
If RFT Loader Auto Login Failed
1: Just wait for open Tool completely
2: Once Tool opened then copy your otp
3: Paste your otp in username and password
4: Press login button in Flash Tool
5: Wait for some time its will success login.
How to use msm download Tool
1: If you selected msm 2.7.2 and its not success
2: Just open it manually and select non europe
3; If non europe not selecting then delete temp from c drive
4: Now use your otp in username and password
5: Don’t Enter otp in verfiy section just try login.
6: Its will success and you can use it now.
How to use o+ Support tool
✅ Step 1: Ready with the OTP for your desired service.
📥 Step 2: Download latest version of O+ Support
🖥 Step 3: Open RFTLoader from the folder, enter the OTP
📂 Step 4: Once Flash Tool opens, load your firmware.
🔍 Step 5: Check your model, PCB, and item code in Flash Tool.
✔ Step 6: Match PCB and item code, and enable NV Default
🔌 Step 7: Verify your device connection port. Then , click Start.
⏳ Step 8: Once model connected, wait for success.